Our Products

PRODUCTS & FINISHES

BUILDING EXTERIOR	BUILDING INTERIOR	FOUNDATION DESIGNS
Eave & Rake Extensions	Liner Panel Systems	With our buildings only
Partition Walls	Mezzanine Systems
Below Eave Canopies	Crane Systems
Parapets	Overhead
Gutters & Downspouts	Underhung
Metal Building Walkdoors	Monorails
3070 (Knock-Down or Pre-Assembled)	Jib
6070 (Knock-Down or Pre-Assembled)	Insulation Systems
RollUp Doors	Vinyl Reinforced Blanket
Sheet Doors	Sag-N-Bag
Rolling Steel Doors	Energy Saver
Rod Hung Walk Door Canopies	Long Tab
Facades	Banding
Ridge Vents	Zees, Cees, Eave Struts & Angles
Roof Curbs Light Panels
Skylights Wall Lights
Louvers Roof Panels
Standing Seam Screwdown "PBR"
Wall Panels
Screwdown "PBR"

BUILDING EXTERIOR

Eave & Rake Extensions
Partition Walls
Below Eave Canopies
Parapets
Gutters & Downspouts
Metal Building Walkdoors
3070 (Knock-Down or Pre-Assembled)
6070 (Knock-Down or Pre-Assembled)
RollUp Doors
Sheet Doors
Rolling Steel Doors
Rod Hung Walk Door Canopies
Facades
Ridge Vents
Roof Curbs Light Panels
Skylights Wall Lights
Louvers Roof Panels
Standing Seam Screwdown “PBR”
Wall Panels
Screwdown “PBR”

BUILDING INTERIOR

Liner Panel Systems
Mezzanine Systems
Crane Systems
Overhead
Underhung
Monorails
Jib
Insulation Systems
Vinyl Reinforced Blanket
Sag-N-Bag
Energy Saver
Long Tab
Banding
Zees, Cees, Eave Struts & Angles

FOUNDATION DESIGNS

With our buildings only

COATINGS & FINISHES

Galvalume

Galvalume is a steel-based roof coating type that includes aluminum, zinc, and silicon that is up to twice as resistant to corrosion as galvanized steel. Invented by Bethlehem Steel Construction Company in the early 1970s, Galvalume coating is made by hot-dipping the metals onto steel coils to make them adhere to the material. The coating can remain with a plain mill finish or painted in a variety of colors. As one of the most popular roofing materials on the market today, it’s impressively durable. It is a low-maintenance material that will last for at least 40 years, providing significant savings throughout its lifetime.

Galvalume Plus

Galvalume Plus^TM is a coated steel sheet that combines the excellent corrosion resistance of a Galvalume^TM coating with a clear, organic surface treatment. The resin coating is applied over both sides of the Galvalume^TM sheet as a final protective layer.

Silicone Modified Polyester

SMP (standard option)

SMP is a factory-applied and oven-baked protective coating used on GALVALUME®, galvanized steel or aluminum substrate. SMP combines excellent physical characteristics and aesthetic values for metal panels and components. Its uses in architectural, industrial, commercial, residential and institutional metal construction are numerous. SMP coatings are formulated for hardness and flexibility, making it a versatile and durable coating system when applied over a proprietary, corrosion resistant primer.

PVDF (optional paint system)

PVDF is often referred to as “KYNAR”. This coating is based on 70% KYNAR® OR HYLAR 5000® fluoropolymer resin, PVDF coatings are specified by leading architects and used by manufacturers of building products as a long-life exterior finish for aluminum, galvanized steel and Galvalume®. The liquid coating is factory applied and oven baked on properly prepared and primed substrates. PVDF coatings typically are used as exterior finishes for metal roofing and sidings. The building components can be post-formed from pre-coated coil stock.

LINERS AND SOFFIT PANELS

R Panel

R Panel is the same as the PBR panel without the purlin bearing leg. This panel is also a thru-fastened wall panel.and is 36” wide 1 ¼” deep major ribs 12” o.c. The flat between each major rib is reinforced with two minor ribs giving the panel added strength.

Artisan Profile

Artisan Profile is a flat panel 1” deep and 12” wide (net coverage). This panel is a concealed fastener panel. This panel can be ordered with or without beads (4” o.c.). Beads are recommended to help in reducing oil canning.

roof and wall panels

PBR (Thru Fastened Panel)

PBR (Purlin Bearing Leg) same as the roof panel is a thru fastened wall panel and is the most widely used in the industry. This panel is 36” wide 1 ¼” deep major ribs 12” o.c. The flat between each major rib is reinforced with two minor ribs giving the panel added strength.

Standing Seam (Concealed Fastener Panel)

Three standing seam options:

Trapezoidal Snapdown is an impressive structural trapezoidal standing seam with a height of 3” and 24″ net coverage. Its snap seam feature eliminates the need for mechanical seaming, while its offset clips allow you to adjust depending on wind speeds. This sleek, easy-to-handle panel provides superior protection in any setting!

Trapezoidal Macanical Seam is also a structural trapezoidal standing seam that requires a mechanical seamer. This panel is 3” tall with a 24” width (net coverage). This panel can be offset either ⅜” (low clips) or 1 ⅜” (tall clips). This panel is used where wind speeds are higher than normal.

Vertical Rib Macanical Seam is a vertical rib standing seam that requires a mechanical seamer. This panel is 2” tall with a 16” width (net coverage). This panel can be offset either ⅜” (low clips) or 1 ⅜” (tall clips).

Wall PBR (Purlin Bearing Leg)